Hedge Cutters

Showing all 6 results

• 

  HECHT 6040 40 Volt Hedge Trimmer

  The HECHT 6040 cordless hedge trimmer is a great helper in the maintenance of hedges and ornamental trees. Thanks to the battery power supply, the operator is not restricted at work by any cables as in electrical machines, while at the same time it is relatively quiet and without emissions compared to the use of an internal combustion engine.

• 

  HECHT 6504 40 Volt Long Reach Trimmer

  HECHT 6504 is a telescopic cordless hedge trimmer, with which you can easily trim hedges even at heights exceeding 3 m. With the correct length setting, the telescopic pole allows you to comfortably trim the front and top of hedges without having to climb a ladder or bend. Just hang the hedge trimmer on your shoulder and in one movement you will pass the fence from the ground to the top edge. To trim the top, simply lower the bar to the required angle. Thanks to the battery drive, you don't have to worry about any power cords that would restrict you at work, or if you are inadvertently at risk of cutting them. This product is part of the ACCU program 5040, with which you have a unique opportunity to operate several different Hecht devices with one type of battery. All products marked with the ACCU program 5040 icon are fully compatible with the 005040B and 005024B batteries
• 

  HECHT 9245 Hedgetrimmer

  Motorized hedge trimmer powered by two-stroke engine of 25.4 cm 3 with output of 1 HP. The hedge trimmer is equipped with a 70 cm long steel bar with a working width of 60 cm. The maximum diameter of cut branches is up to 2.2 cm. Vibration dampers also increase comfort. For convenient cutting of fences at different angles there is also a rotating main handle, thanks to which the operator will hold the hedge trimmer firmly and comfortably with both hands in all directions. The weight of the hedge trimmer is 5.8 kg.  
• 

  HECHT 9275 PROFI Hedge Trimmer

  The professional petrol hedge trimmer Hecht 9275 is ideal for professional and energy-saving hedge trimming. This powerful device can cope well with difficult situations and impresses with its capacity as well as its ergonomic handling. The Hecht 9275 Profi is suitable for branch sizes up to 2.8 cm in diameter. This makes it possible to bring almost every hedge into the desired shape. With a cubic capacity of 22.2 cc and a power of 0.95 hp (0.7 kW) , the 2-stroke engine powerfully and precisely cuts the counter-rotating knives on both sides with harder wood. Thanks to the ergonomic shape and the ideal operating elements such as a rotatable handle, ergonomic handles and the anti-vibration system with steel springs, the hedge trimmer can also be used for a long time without tiring. The easy start is provided by a manual fuel pump, which pumps the fuel into the carburettor
• 

  HECHT 9375 PROF Hedge Trimmer

  The Hecht 9375 petrol hedge trimmer is ideally suited for the precise pruning of hedges. Shrubs and hedges can be easily cut back because the hedge trimmer has an effective  cutting length of 670 mm and a hardened upper and lower blade that is sharpened on both sides . The high-quality gearbox with metal housing guarantees a long service life and drives the knife with an oscillation speed of 1860 osz / min (3720 strokes per minute). Particularly suitable for a powerful cut, because with the low knife speed and the robust gear, the Hecht 9375 achieves a cutting capacity of up to 20 mm.  Thanks to the ergonomic handles, the single-lever operation and the low weight of only 5.3 kg , even difficult cutting situations can be mastered without any problems. The anti-vibration system with its steel springs reduces the vibrations transmitted to the handle, which means that longer work is possible without any problems and the Hecht 9375 becomes a fantastic garden helper. The manual fuel pump makes it easy to start the hedge trimmer, which pumps fuel into the carburettor at the push of a thumb. The supplied quiver protection protects the knife from damage during transport and storage.
• 

  Makita – UH65570 Hedge Cutter

  The Makita UH6570 is for semi-professional applications and has been developed as a successor to the predecessor UH6350/UH5550/UH4850/UH4050 series models, featuring renewed external appearance and more improved handling.